Accessing a wireless network is becoming as commonplace as drinking a cup of coffee. Wireless access points are being installed in schools, restaurants, airports, offices—almost everywhere!And just as you would with a wired network, you need to safeguard these wireless networks from unexpected power surges and spikes. That’s why you need Power over Ethernet Surge Protectors. Not only do they protect line-to-line data transmissions, they also protect against ground-to-line surges.
Models are available for 60-volt and 30-volt power requirements. Protects datalines for both line-to-line and ground to line surges. Ideal to protect wireless access points that are typically installed in remote locations and expose devices to severe transients and surges.
Interfaces Connectors — (2) RJ45 F
Engine —
Wires protected: all
Standards: IEEE 802.3af Power-over-Ethernet
Signals supported: IEEE 802.3af
Protection: pins 1,2, 3 and 6: differential and common mode
pins 4, 5, 7 and 8: SP075A: differential and common mode, line to ground, SP077A: common mode, line to ground
Clamping Voltage: pins 1, 2, 3 and 6: 7.5 V; pins 4, 5, 7 and 8: SP075A: 60 V, SP077A: 30V
Peak pulse current: pins 1, 2, 3 and 6: 132 A (10/100 waveform); pins 4, 5, 7 and 8: SP075A: 50 A, SP077A: 103 A
Response Time: < 5 ns
Max. shunt capacitance: < 25 pF
Physical and Environmental —
Dimensions: 91H x 37W x 23D mm
Weight: 0.3 kg
Ostoskori
Kirjaudu sisään
Ota yhteyttä
