MMC Converter Rack

Convert 100-Mbps segments between twisted-pair and single-mode or multimode fibre in half- or full-duplex mode. Choose from 6 different chassis and various converter modules for exactly the right configuration.

Chassis
Choose a 1-, 4-, 8- or 12-slot chassis. The 1- and 4-slot chassis are standalone models. The 8- and 12-slot chassis are rackmountable and 1U high. The 12-slot chassis has a slot for a Redundant Power Supply Module. Choose from AC- and DC-powered units. You can install any combination of modules in the chassis, giving you complete flexibility.

Conversion modules
The 10- and 100-Mbps modules have a LinkLoss feature, so you can identify problems on the fibre segment from the twisted-pair side, and vice-versa.

The FiberAlert™ feature minimises problems associated with the loss of one strand of fibre cable by sending fault alerts.

All 10-Mbps twisted-pair modules feature an internal two-position switch on the twisted-pair port, which eliminates the need for a cross-over cable.

Use the 100-Mbps modules to convert from twisted-pair Fast Ethernet to single-mode or multimode fibre with ST and SC connectors.

The 1300-nm Single-Mode to 1300-nm Multimode Modules come in two-packs, work in pairs, and require two chassis slots. One module features a single-mode receive port and a multimode transmit port; the other has a multimode receive port and a single-mode transmit port.

Operating Temperature — 0 to +50°C
Operating Humidity — 5 - 95%, noncondensing
Power — 120/240 VAC, 50/60 Hz
Dimensions — LE7401A-R2: 3.8H x 11.9W x 11.2D cm; LE7404A: 4.6H x 21.8W x 12.7D cm; LE7408A: 4.6H x 44.5W x 12.7D cm; LE7412A: 4.4H x 44.5W x 22.25D cm
Weight — LE7401A-R2: 0.9 kg; LE7404A: 1.6 kg; LE7408A: 2.8 kg; LE7412A: 5 kg