CX Series KVM Switch Remote Unit - VGA, PS/2 Console

The CATmix KVM Extender offer flexible point-to-point (Single Access) extensions.

USB or PS/2
The transmitter modules (SAMs) mark out by a small Zero U design and low weight.
Choose between USB- and PS/2-receivers with or without 44.1kHz Audio. The USB-models feature in addition switching between two separate computers or KVM Switching systems.
Both models may be combined in the same application.

Distance and Resolutions
Extend Keyboard/Video/Mouse/(Audio) signals without hazel up to 300 metres Meter at resolutions up to 1280 x 1024 @ 60Hz. Resolutions up to 1600 x 1200 @ 60Hz can be transmitted up to 100m depending on the skew of your CATx cable. Over a distance of 50m the extenders provide clear and sharp video at a high resolution up to s 1920 x 1200.

Add CATmix KVM Extender to your CX application
The CATmix KVM receivers work perfectly together with the CX KVM switching system. Use them to include easily remote user stations to the CX Switches. Choose the CATmix receiver with audio capabilities if you want to hear the acoustic warning signals from your servers.

Receivers:
Size —
all PS/2-Receiver: 75 x 25 x 125 mm,
all USB- Receiver: 75 x 26 x 170 mm (WxHxD)
Size — 430 g

Interface —
KV04-REM: (1) RJ45 F, (1) HD15 F, (2) 6-pin MiniDin F;
KV04A-REM and KV04AS-REM also: (1) 3.5mm audio, (1) 2.5mm power F 5 VDC
KV04U-REM: (2) RJ45 F, (1) HD15 F, (2) USB Type A;
KV04AU-REM and KV04AUS-REM also: (1) 3.5mm audio, (1) 2.5mm power F 5 VDC

SAMs:
Size — 45 x 25 x 65mm (WxHxD) with attached 300mm pigtail cable for KVM(A)

Weight —
Without Audio: 100g;
With Audio: 150g

Interface —
all (1) RJ45 F, (1) HD15 M;
KV1400A/1402A also (2) 6-pin MiniDin M;
KV1401A/1403A also (1) USB Type A M;
KV1402A/1403A also (1) 3.5mm audio

Connectors— (1) 3.5mm audio jack, (2) USB type A female for mouse and keyboard, (1) HD15 female for video, (2) RJ45 female for interconnect, (1) barrel type plug for power

KV04A-REM
(1) Remote Unit
(1) 5VDC 2.5A Power Supply
(4) Rubber Feet